Results of 1 - 10 of about 70 for build (0.001 sec.)
- Python 10517
- The DuckDB Python package has its own repository at duckdb/duckdb-python and uses nanobind 3 to create Python bindings with DuckDB. Prerequisites This guide assumes: You have a full clone of the DuckDB Python package source, including its g
...thon environment and dependency management. While using pip for a development environment with an editable install without build isolation is possible, we don't provide guidance for that approach in this guide. We use CLion as our IDE. This guide does...python.git git fetch --all Important notes: * DuckDB is vendored as a git submodule and must be initialized, otherwise the build fails with RuntimeError: Duckdb submodule not initialized * The package version is the release_version in pyproject.toml f...rsion >= 0.8.0. Development Environment Setup 1. Platform-Specific Setup All Platforms Python 3.11 or later; free-threaded builds of CPython are not supported uv >= 0.8.0 required CMake, Ninja, nanobind and the NumPy headers (installed via UV) C++ com... - https://man.mtool.work/duckdb/2.0/dev/building/python.html
- Building Configuration 10418
- Build Types DuckDB can be built in many different settings, most of these correspond directly to CMake but not all of them. release This build has been stripped of all the assertions and debug symbols and code, optimized for performance. de
...bug This build runs with all the debug information, including symbols, assertions and #ifdef DEBUG blocks. Due to these, binaries of this...build are expected to be slow. Note: the special debug defines are not automatically set for this build. relassert This build do...t make it possible to step through the execution with line number information and D_ASSERT lines are still checked in this build. Binaries of this build mode are significantly faster than those of the debug mode. reldebug This build is similar to rela... - https://man.mtool.work/duckdb/2.0/dev/building/build_configuration.html
- Android 10390
- DuckDB has experimental support for Android. Please use the latest main branch of DuckDB instead of the stable versions. Building the DuckDB Library Using the Android NDK We provide build instructions for setups using macOS and Android Stud
...t the Android ABI . For example: bash ANDROID_ABI=arm64-v8a Or: bash ANDROID_ABI=x86_64 If you would like to use the Ninja build system , make sure it is installed and available on the PATH . Set the list of DuckDB extensions to build. These will be s...ly linked in the binary. For example: bash DUCKDB_EXTENSIONS="icu;json;parquet" Navigate to DuckDB's directory and run the build as follows: bash PLATFORM_NAME="android_${ANDROID_ABI}" BUILDDIR=./build/${PLATFORM_NAME} mkdir -p ${BUILDDIR} cd ${BUILDD...IR} cmake \ -G "Ninja" \ -DEXTENSION_STATIC_BUILD=1 \ -DDUCKDB_EXTRA_LINK_FLAGS="-llog" \ -DBUILD_EXTENSIONS=${DUCKDB_EXTENSIONS} \ -DENABLE_EXTENSION_AUTOLOADING=1 \ -DENA... - https://man.mtool.work/duckdb/2.0/dev/building/android.html
- Linux 10037
- Prerequisites On Linux, install the required packages with the package manager of your distribution. Ubuntu and Debian CLI Client On Ubuntu and Debian (and also MX Linux, Linux Mint, etc.), the requirements for building the DuckDB CLI clien
...t are the following: sudo apt-get update sudo apt-get install -y git g++ cmake ninja-build libssl-dev libcurl4-openssl-dev git clone https://github.com/duckdb/duckdb cd duckdb GEN=ninja make Fedora, CentOS and Red...Hat CLI Client The requirements for building the DuckDB CLI client on Fedora, CentOS, Red Hat, AlmaLinux, Rocky Linux, etc. are the following: sudo yum install -y g...it g++ cmake ninja-build openssl-devel git clone https://github.com/duckdb/duckdb cd duckdb GEN=ninja make Note that on older Red Hat-based distrib... - https://man.mtool.work/duckdb/2.0/dev/building/linux.html
- Windows 9967
- On Windows, DuckDB requires the Microsoft Visual C++ Redistributable package both as a build-time and runtime dependency. Note that unlike the build process on UNIX-like systems, the Windows builds directly call CMake. Clang-cl To build Duc
...kDB on Windows, we recommend using the clang-cl compiler with the Visual Studio build tools (MSVC toolchain, Windows SDK and linker). This is the setup used by DuckDB's CI workflow . Install Visual Studio (or...the Build Tools for Visual Studio) with the “Desktop development with C++” workload and the “C++ Clang Compiler for Windows” compone...ows_release target invokes CMake with the bundled extensions configuration ( .github/config/bundled_extensions.cmake ) and builds DuckDB in Release mode. MSYS2 and MinGW64 DuckDB on Windows can also be built with MSYS2 and MinGW64 . Note that this bui... - https://man.mtool.work/duckdb/2.0/dev/building/windows.html
- Raspberry Pi 9939
- DuckDB is not officially distributed for the Raspberry Pi OS (previously called Raspbian). You can build it following the instructions on this page. Raspberry Pi (64-bit) First, install the required build packages: sudo apt-get update sudo
...apt-get install -y git g++ cmake ninja-build Then, clone and build it as follows: git clone https://github.com/duckdb/duckdb cd duckdb GEN=ninja BUILD_EXTENSIONS="icu;...json" make Finally, run it: build/release/duckdb Raspberry Pi (32-bit) On 32-bit Raspberry Pi boards, you need to add the -latomic link flag . As extensions...are not distributed for this platform, it's recommended to also include them in the build. For example: mkdir build cd build cmake .. \ -DBUILD_EXTENSIONS="httpfs;json;parquet" \ -DDUCKDB_EXTRA_LINK_FLAGS="-latom... - https://man.mtool.work/duckdb/2.0/dev/building/raspberry_pi.html
- Building DuckDB from Source 9558
- When Should You Build DuckDB? DuckDB binaries are available for stable and preview builds on the installation page . In most cases, it's recommended to use these binaries. When you are running on an experimental platform (e.g., Raspberry Pi
...) or you would like to build the project for an unmerged pull request, you can build DuckDB from source based on the duckdb/duckdb repository hosted on...GitHub . This page explains the steps for building DuckDB. Build Instructions Prerequisites New DuckDB 2.0 requires a C++17 compiler, while earlier versions required a C+...eds CMake and a C++17-compliant compiler (e.g., GCC, Clang, Apple-Clang, MSVC). Additionally, we recommend using the Ninja build system , which automatically parallelizes the build process. Building with the Makefile A Makefile wraps the build process... - https://man.mtool.work/duckdb/2.0/dev/building/overview.html
- Building Extensions 9516
- Extensions can be built from source and installed from the resulting local binary. Building Extensions To build using extension flags, set the BUILD_EXTENSIONS flag to the list of extensions that you want to be built. For example: BUILD_EXT
...ENSIONS='autocomplete;httpfs;icu;json;tpch' GEN=ninja make This option also accepts out-of-tree extensions such as delta : BUILD_EXTENSIONS='autocomplete;httpfs;icu;json;tpch;delta' GEN=ninja make Since DuckDB 2.0, extensions listed in BUILD_EXTENSION...S are built but not statically linked into the DuckDB executable by default: they are installed from the build's own extension repository and loaded on first use. To link them into the executable, set LINK_CORE_EXTENSIONS=1 or list t...hem in STATICALLY_LINK_EXTENSIONS (see Linking Extensions ). Special Extension Flags BUILD_JEMALLOC This flag controls whether the jemalloc memory allocator is linked into DuckDB. Unlike TPC-H and TPC-DS, jemalloc... - https://man.mtool.work/duckdb/2.0/dev/building/building_extensions.html
- Unofficial and Unsupported Platforms 9459
- Warning The platforms listed on this page are not officially supported. The build instructions are provided on a best-effort basis. Community contributions are very welcome. DuckDB is built and distributed for several platforms with differe
...orms can be expected to work. 32-bit Architectures 32-bit architectures are officially not supported but it is possible to build DuckDB manually for some of these platforms. For example, see the build instructions for 32-bit Raspberry Pi boards . Note...y may exhibit correctness errors on certain operations. Therefore, its use is not recommended. RISC-V Architectures Native Build (Recommended) DuckDB builds natively on RISC-V 64-bit boards without any special flags. Tested on a BananaPi F3 ( SpacemiT...64gc, 8 cores @ 1.6 GHz, 16 GB RAM) running Debian Trixie: sudo apt-get update sudo apt-get install -y git g++ cmake ninja-build git clone --depth=1 https://github.com/duckdb/duckdb cd duckdb mkdir build && cd build cmake .. -DCMAKE_BUILD_TYPE=Release... - https://man.mtool.work/duckdb/2.0/dev/building/unofficial_and_unsupported_platfo...
- Troubleshoot 9332
- Overview This page collects common issues encountered when using the DuckDB Go client, together with their workarounds. Because the client uses cgo to embed DuckDB, most build problems are cgo or linker problems. If you run into a problem t
...validInput . The Msg field contains the error message. undefined: conn and Other cgo Errors An undefined: conn error while building means the Go compiler has decided cgo is unavailable, so the DuckDB bindings were not compiled. There are two common ca...uses: Build tools are missing. cgo needs a C compiler and toolchain. On Debian or Ubuntu, install them with: bash sudo apt-get update...&& sudo apt-get install build-essential Cross-compiling disables cgo. The Go compiler turns cgo off automatically when cross-compiling. Re-enable it and... - https://man.mtool.work/duckdb/2.0/clients/go/troubleshoot.html
DuckDB 2.0 Documentation / man.mtool.work