Results of 1 - 2 of about 2 for boards (0.000 sec.)
- Unofficial and Unsupported Platforms 11228
- Warning The platforms listed on this page are not officially supported. The build instructions are provided on a best-effort basis. Community contributions are very welcome. DuckDB is built and distributed for several platforms with differe
...ible to build DuckDB manually for some of these platforms. For example, see the build instructions for 32-bit Raspberry Pi boards . Note that 32-bit platforms are limited to using 4 GiB RAM due to the amount of addressable memory. Big-Endian Architectu...efore, its use is not recommended. RISC-V Architectures Native Build (Recommended) DuckDB builds natively on RISC-V 64-bit boards without any special flags. Tested on a BananaPi F3 ( SpacemiT K1 , rv64gc, 8 cores @ 1.6 GHz, 16 GB RAM) running Debian Tr...lds successfully from source on riscv64: pip install duckdb --no-binary duckdb Build with RVV (RISC-V Vector Extension) On boards with RVV 1.0 support (e.g., SpacemiT K3 with vlen 256), you can enable vector instructions for better performance. The use... - https://man.mtool.work/duckdb/2.0/dev/building/unofficial_and_unsupported_platfo...
- Raspberry Pi 7485
- DuckDB is not officially distributed for the Raspberry Pi OS (previously called Raspbian). You can build it following the instructions on this page. Raspberry Pi (64-bit) First, install the required build packages: sudo apt-get update sudo
...=ninja BUILD_EXTENSIONS="icu;json" make Finally, run it: build/release/duckdb Raspberry Pi (32-bit) On 32-bit Raspberry Pi boards, you need to add the -latomic link flag . As extensions are not distributed for this platform, it's recommended to also in... - https://man.mtool.work/duckdb/2.0/dev/building/raspberry_pi.html
PREV
1
NEXT
DuckDB 2.0 Documentation / man.mtool.work