Results of 1 - 10 of about 22 for Debug (0.002 sec.)
- Debugging 13265
- The purpose of the tests is to figure out when things break. Inevitably changes made to the system will cause one of the tests to fail, and when that happens the test needs to be debugged. First, it is always recommended to run in debug mod
...e. This can be done by compiling the system using the command make debug . Second, it is recommended to only run the test that breaks. This can be done by passing the filename of the breaking tes...t to the test suite as a command line parameter (e.g., build/debug/test/unittest test/sql/projection/test_simple_projection.test ). For more options on running a subset of the tests see the...Triggering which tests to run section. After that, a debugger can be attached to the program and the test can be debugged. In the sqllogictests it is normally difficult to break on... - https://man.mtool.work/duckdb/2.0/dev/sqllogictest/debugging.html
- Building Configuration 12289
- Build Types DuckDB can be built in many different settings, most of these correspond directly to CMake but not all of them. release This build has been stripped of all the assertions and debug symbols and code, optimized for performance. debug
...bug This build runs with all the debug information, including symbols, assertions and #ifdef DEBUG blocks. Due to these, binaries of this build are expected to b...e slow. Note: the special debug defines are not automatically set for this build. relassert This build does not trigger the #ifdef DEBUG code blocks but i...t still has debug symbols that make it possible to step through the execution with line number information and D_ASSERT lines are still chec... - https://man.mtool.work/duckdb/2.0/dev/building/build_configuration.html
- Python 10673
- The DuckDB Python package has its own repository at duckdb/duckdb-python and uses nanobind 3 to create Python bindings with DuckDB. Prerequisites This guide assumes: You have a full clone of the DuckDB Python package source, including its g
...install the project without build isolation uv sync --no-build-isolation -v --reinstall -p 3.13 The result is an editable Debug build in build/debug/ . Editable builds use the full CPython API; only wheels use the stable ABI. Why two steps? * uv sync...tifacts uv cache clean rm -rf build .venv uv.lock IDE Setup (CLion) For CLion users, the project can be configured for C++ debugging of the Python extension: CMake Profile Configuration In Settings → Build, Execution, Deployment → CMake , create a Deb...ug profile: Name: Debug Build type: Debug Generator: Ninja CMake Options: text -DCMAKE_PREFIX_PATH=$CMakeProjectDir$/.venv;$CMAKE_PREFIX_PATH Pyth... - https://man.mtool.work/duckdb/2.0/dev/building/python.html
- Building Extensions 10184
- Extensions can be built from source and installed from the resulting local binary. Building Extensions To build using extension flags, set the BUILD_EXTENSIONS flag to the list of extensions that you want to be built. For example: BUILD_EXT
...ot a proper extension and it's not distributed as such. Enabling this allows TPC-E enabled queries through our test suite. Debug Flags CRASH_ON_ASSERT D_ASSERT(condition) is used all throughout the code, these will throw an InternalException in debug...them instantly to make sure that there aren't situations where this memory is still being used, despite not being pinned. DEBUG_STACKTRACE When a crash or assertion hit occurs in a test, print a stack trace. This is useful when debugging a crash that...is hard to pinpoint with a debugger attached. Using a CMake Configuration File To build using a CMake configuration file, create an extension configuration... - https://man.mtool.work/duckdb/2.0/dev/building/building_extensions.html
- macOS 9208
- Prerequisites Install Xcode and Homebrew . Then, install the required packages with: brew install git cmake ninja Building DuckDB Clone and build DuckDB as follows. git clone https://github.com/duckdb/duckdb cd duckdb GEN=ninja make Once th
...essfully, you can find the duckdb binary in the build directory: build/release/duckdb For different build configurations ( debug , relassert , etc.), please consult the Build Configurations page . Troubleshooting Build Failure: 'string' file not found...builder/external/duckdb/third_party/yyjson/include -I/Users/builder/external/duckdb/third_party/libpg_query/include -O3 -DNDEBUG -O3 -DNDEBUG -std=c++11 -arch arm64 -isysroot /Library/Developer/CommandLineTools/SDKs/MacOSX15.1.sdk -fPIC -fvisibility=h...applications on your system. Proceed with caution. sudo rm -rf /Library/Developer/CommandLineTools xcode-select --install Debug Build Prints malloc Warning Problem: The debug build on macOS prints a malloc warning, e.g.: duckdb(83082,0x205b30240) mal... - https://man.mtool.work/duckdb/2.0/dev/building/macos.html
- Configuration 8636
- DuckDB has a number of configuration options that can be used to change the behavior of the system. The configuration options can be set using either the SET statement or the PRAGMA statement . They can be reset to their original values usi
...emory_limit = '10GB'; Configure the system to use 1 thread. SET threads TO 1; Turn logging on and set the logging level to debug . For additional details on logging levels, see Log Level . In the CLI client, the default log storage ( shell_log_storage...we switch to the memory log storage first: SET logging_storage = 'memory'; SET enable_logging = true; SET logging_level = 'debug'; Write a single log message with the debug level and a connection scope: SELECT write_log('A new client has connected.',...level := 'debug', scope := 'connection'); Write a single log message with a debug level and a connection scope and a custom log_type : SEL... - https://man.mtool.work/duckdb/2.0/configuration/overview.html
- Installing Extensions 8232
- To install core DuckDB extensions, use the INSTALL command. For example: INSTALL httpfs; This installs the extension from the default repository ( core ). Extension Repositories By default, DuckDB extensions are installed from a single repo
...uckdb.org Nightly builds for core community http://community-extensions.duckdb.org DuckDB community extensions local_build_debug ./build/debug/repository Repository created when building DuckDB from source in debug mode (for development) local_build_r... - https://man.mtool.work/duckdb/2.0/extensions/installing_extensions.html
- Reference 8232
- This page lists the functions, settings, and log types exposed by the quack extension . For a tour of the protocol, start with the Overview . Function Reference Server Management Function Description quack_serve(⟨listen_uri⟩, ...) Start a s
...Maximum number of rows the server retains in the result cache ( 0 = unlimited). The extension also registers several quack_debug_* settings, which are intended for testing the protocol and should not be used in production. Node Identity These settings...lback uptime anchor when whoami_started_at is empty. Logging Two log types are registered by the extension. Enable them to debug connectivity or measure request timing. Quack Log Structured log of every Quack message (both client- and server-side): CA...lient_query_id query server duration_ms response_type error 60 CONNECTION 2 18 18 NULL 2026-05-10 09:06:19.841623+02 Quack DEBUG CONNECTION_REQUEST 18 NULL http://localhost:9494 41 CONNECTION_RESPONSE NULL 60 CONNECTION 2 18 18 NULL 2026-05-10 09:06:1... - https://man.mtool.work/duckdb/2.0/quack/reference.html
- DuckDB_% Metadata Functions 8147
- DuckDB offers a collection of table functions that provide metadata about the current database. These functions reside in the main schema and their names are prefixed with duckdb_ . The resultset returned by a duckdb_ table function may be
...mestamp of the log entry. TIMESTAMP type The type of the log entry. VARCHAR log_level The level of the log entry ( TRACE , DEBUG , INFO , WARN , ERROR or FATAL ). VARCHAR message The message of the log entry. VARCHAR duckdb_memory The duckdb_memory()...e. VARCHAR scope The scope of the setting ( LOCAL or GLOBAL ). VARCHAR New As of DuckDB 2.0, duckdb_settings() accepts the debug , deprecated , and include_all named parameters. By default, duckdb_settings() returns only regular settings and omits deb...ug-only and deprecated ones. The debug and deprecated parameters select which category to return instead: for example, duckdb_settings(deprecated := true) return... - https://man.mtool.work/duckdb/2.0/sql/meta/duckdb_table_functions.html
- Building DuckDB from Source 7912
- When Should You Build DuckDB? DuckDB binaries are available for stable and preview builds on the installation page . In most cases, it's recommended to use these binaries. When you are running on an experimental platform (e.g., Raspberry Pi
...s. See Build Configuration for targets and configuration flags. make make release # same as plain make make relassert make debug GEN=ninja make # for use with Ninja BUILD_BENCHMARK=1 make # build with benchmarks debug builds use a lot of disk space –... - https://man.mtool.work/duckdb/2.0/dev/building/overview.html
DuckDB 2.0 Documentation / man.mtool.work